DucCutters: Press Release

Buy A Patch!


Raw CNC	Hand Finished	Sandblasted Bottom

DucFoot™ Kickstand Pivot Extension Now Available
For Aluminum Kickstands

Now available! From the original design that the kickstand on the infamous "TurboMonster" was made. We have recreated DucFoot Kickstand Pivot in a CNC process for semi-mass production.

The DucFoot Kickstand Pivot Extension is designed to increase the displacement area of the kickstand pivot. This will help prevent the kickstand from sinking into hot asphalt or loose dirt. It is also designed to give you the option of extending your kickstand by over an inch. The DucFoot is designed to be installed by a professional welder. Improper welding may result in kickstand failure.

Approximately 3W" x 3L" x 1.25H"
The Bottom is Sandblast Engraved With The DucCutters Logo
Made of 6061-T6 Aluminum
Made in The USA

The "DucFoot Kickstand Pivot Extension" is available in the DucCutters Limited store in "Raw CNC ($35.00)" and "Hand Finished ($55.00)".

Click Here to return to the press releases archive.

Customizing, Forced induction systems (turbocharging, supercharging, nitrous oxide, etc.), drag racing, road racing and driving a motor vehicle are ALL inherently dangerous and should never be taken lightly. Forced induction systems and racing will shorten your vehicle mechanical life and increase your risk of serious accidents. The information in this web site has been collected from several sources, and may contain errors. We do not accept any responsibility for the use of the information contained in this site. Be sure to double check all information and proceed with extreme caution. Never race on the street!