JOIN US  |  ABOUT THE CLUB PRESIDENT      DucCuttersLimited




SHARE THIS PAGE
Bookmark and Share

RapidSSL

Gooichi 749
Project By: Gooichi Motorsports (sales@gooichimotorsports.com)
Web Site: www.gooichimotorsports.com

Click To EnlargeIt all started when I bought a yellow 2003 749 (mint condition) way back in '04. I can never leave anything stock, and one thing led to another. I wanted to do something differant with the bike, something that would make Ducati purists cringe.

The bike was lowered, and I made some custom exhaust for it. Designed some custom night rider tailights for it, and then it snowballed. I tore it all the way down for a full black frame color change and a nice semi-gloss black cherry paintjob.

Well neadless to say this wasn't enough. I wanted something CRAZY! So we decided to repaint it. I wanted to go for an old school look, so we sprayed it hot rod black with solid red flake scallops. equipped with red and white pin stripes all around. I also designed a nice air ride kit for it. Along with some carbon pieces and custom sidemount exhaust.

For some this would be enough... but no no no, when things snowball around here, it never stops! I ended up making a one-off, 14 over, aluminum tubular swingarm to house a custom fat spoked rim. We went with "Ride Wright Fat 50" 18 inch wheels, with a 300 in the back, chrome spokes with black rims.

The air ride was redisigned to slam the bike even more and have an assortment of settings like firmness and automatic level sensing. I cut 6" off the bottom of the fairing and made a skidplate/kickstand that mounted on the bottom of the motor. this allowed the bike to be dropped straight on the ground.


Gooichi 749
gooichimotorsports00.jpg (786 K) gooichimotorsports01.jpg (643 K) gooichimotorsports03.JPG (1 Mb) gooichimotorsports04.jpg (53 K)

Gooichi 749
(2003 Ducati 749)

  • Custom 14 Over Aluminum Tubular Swingarm
  • Custom Old School Paint Done In House
  • Custom Air Ride Setup
  • Custom Exhaust
  • Custom Elk Skin Seats
  • Custom Faring
  • Custom Ride Wright Fat 50 Wheels
    (300 Rear, 18" Front And Back)
  • Slingshot Racing Rearsets
  • Slingshot Racing Oil Cap
  • Slingshot Racing Counter Sprocket Cover
  • Slingshot Racing Gas Cap
  • Slingshot Racing Fork Adjusters
  • Slingshot Racing Bar Ends
  • Double Bubble Windscreen
  • And So On...!

Gooichi Motorsports


FaceBook

Twitter

Projects

Project

News


Legal Notice

Motor Vehicle Modification
Customizing, forced induction systems (turbocharging, supercharging, nitrous oxide, etc.), frame modification, and other major vihicle modifications should never be taken lightly. Forced induction systems will shorten your vehicle mechanical life and increase your risk of serious accidents. The information in this website has been collected from several sources, and may contain errors. We do not accept any responsibility for the use of the information contained in this site. Be sure to double check all information and proceed with extreme caution. Any modifaction to your engine, frame or other vital part of your vehicle should only be done my trained professionals.

Racing: High Speed Driving/Riding
Drag racing, road racing and driving a motor vehicle are ALL inherently dangerous and should never be taken lightly. High speed driving/riding should only be done on closed-cuites, under strict guidlines. High speed driving/riding will shorten your vehicle mechanical life and increase your risk of serious accidents. Any form of street racing is just unacceptable. Never race on the street!

Manufacturer Representation
These project may not be officially endorsed by the manufacturer the project is representing. The projects are personal concepts only and does not reflect on the manufacturer. Any copyrighted logos or design cues that might be infringed on by this project are totally without malus, and only used by the designer to show their respect for the manufacturer. This club does not have any official sponsorship or endorment from any manufacturers.

DucCutters Logo
The DucCutters logo (slashed circle and cross-bones) is a register trademark of the club presdient, William Johnson. The logo is intended for the promotional use of the DucCutters club.

Reporting An Isuue
William C. Johnson (dba Possession Studios and DucCutters) is registered with the US Copyright Office in accordance with the terms of the Digital Millennium Copyright Act (the "Act"). Possession Studios may remove any content that allegedly infringes anyone's copyright. Direct notices regarding infringement should be sent to azbill@PossessionStudios.com.
DucCutters